· Fenix Red Filter Adapter for PD, LD series.
For use for the following Fenix lights L1x, L2x, P1x, P2x, P3x
This is a filter which attaches to Fenix flashlights to give off penetrable red light.
Made with a toughened ultra clear glass lens with AR coating and high temperature resistance.
The filter seat uses the material PC 2805
Compatible with AA and cr123 Fenix flashlights
PLEASE NOTE: This filter adapter will only work with the following lights in the Fenix Digital series:
PD30, PD20, LD20, LD10, P3D, P2D, L1D, L2D, P1D, L1T/L2Tv2.0 (It will not work with first version L1T/L2T
· Fenix Red Filter adapter for TK series.
This is a red filter attachment for the Fenix TK-Series flashlights.
It filters through a strong red light, great for penetrating fog and smoke, and great for signaling.
Uses a toughened ultra-clear glass lens with anti-reflective coating that provides both heat resistance and maximum light penetrability
Made from PC 2805 plastic, created by Bayer MaterialScience AG. PC 2805 plastic can withstand impact and has anti-aging components.
Easy to attach, easy to remove
39.7mm (D) x 25mm (H)
PLEASE NOTE: This diffuser tip will only work with the Fenix TK-Series lights: TK10, TK11, and TK20.
Not fit on TA30, Ta20 and TA21.
· Fenix Diffuser Tip in white for LD , PD series.
For use for the following Fenix lights L1x, L2x, P1x, P2x, P3x, LD10, LD20. PD20, PD30
This is an attachment for Fenix flashlights which creates a softer light for use while
reading in dark areas. Once attached, it can also be used as a camping light or signal lamp.
Made out of the impact resistant material PC 2805
High temperature resistance with good heat stability
Easy to attach, easy to remove
Compatible with AA and cr123 Fenix Flashlights
PLEASE NOTE: This diffuser tip will only work with the following lights in the Fenix Digital series:
PD30, PD20, LD20, LD10, P3D, P2D, L1D, L2D, P1D, L1T/L2Tv2.0 (It will not work with first version L1T/L2T)
· Fenix Diffuser Tips in white or red for TK series
For use for the following Fenix lights TK10, TK11, TK20
This is an attachment for the Fenix TK-series flashlights which converts
the focused high-output beam of the flashlight into a softer, diffused, wide-angle light.
It's great for a reading light, a camping light, or even a signal beacon.
Specifications
Made from high-quality PC 2805 plastic creadted by Bayer MaterialScience AG
Anti-impact qualities (PC 2805 is used in bullet-proof applications!)
High temperature resistance
Easy to attach and remove
Dimensions: 120mm (L) , 39.4mm (D)
· Fenix Diffuser Tip in red for LD, PD series.
For use for the following Fenix lights L1x, L2x, P1x, P2x, P3x
This is an attachment for Fenix flashlights which creates a softer light for use while
reading in dark areas. Once attached, it can also be used as a camping light or signal lamp.
Made out of the impact resistant material PC 2805
High temperature resistance with good heat stability
Easy to attach, easy to remove
Compatible with AA and cr123 Fenix Flashlights
PLEASE NOTE: This diffuser tip will only work with the following lights in the Fenix Digital series:
PD30, PD20, LD20, LD10, P3D, P2D, L1D, L2D, P1D, L1T/L2Tv2.0 (It will not work with first version L1T/L2T)
· Fenix AD401 "Headlight" Diffuser Lens
The AD401 has a wide range of application. With an open-structure design,
the Fenix Diffuser Lens adapts to any headlamp or flashlight with a diameter of 20 mm -21.5 mm.
This lens adapts to the following Fenix flashlights: L1D, L1T, L2T, L2D, P2D, P3D, LD10, LD20, PD20, PD30, HP10
· Fenix Traffic Wand AD201 for P and L series.
Fenix's traffic wand will convert your flashlight into a glowing orange high-visibility wand.
It's a great option for emergency situations and traffic control.
Features
Made from PC 2805 plastic created by Bayer Matrial Science AG
Impact and heat resistant (PC 2805 is actually used in bullet-proof applications)
Easy to attach, easy to remove
21.5mm diameter
Compatible with the following Fenix models: LD10 / LD20 / L1D / L2D / PD20 / PD30 / P2D / P3D
· Fenix Traffic Wand AD202 for TK and TA series.
 The Fenix AD202 Traffic Wand allows you to "convert" your flashlight into a highly-visible glowing orange wand.
The AD202 is compatible with the following Fenix models: TK10, TK11, TK12, TK20, TA20, and TA21.
Features
Made from PC2805 plastic, manufactured by Bayer Material Science AG
Anti-impact and anti-heat properties
Easy to attach and remove
Length: 180mm, diameter (largest): 34mm
Click link to see picture of Fenix Traffic Wand.
Fenix L1D body and tail switch for
L2D(LD20) CE Q5 or L1D (LD10)CE Q5
By purchasing the "Fenix P2D CE Q5 Body Tube + Tail" you will be able to convert your Fenix L2D (LD20) or L1D (LD10)Cree Q5
into a Fenix P2D CE Q5 or PD20 CE Q5.
Battery Cap included
· Fenix TK12 EX (18650 extension tube ) for Fenix TK12
By purchasing the "Fenix TK12 EX, you will be able to use a 18650 battery into your TK12.
· Fenix Bike Flashlight Mount $13.99 CAD
Introducing the Fenix 360 degree Bike Mount
Another quality product from Fenix. The 360 bike mount molded from German Bayer PVC Plastic is
extremely rugged and durable with anti-aging and UV resistant elements. This enables the mount
to withstand extended exposure to sunlight and weather elements.
Adjustable grip accomodates various handlebar and flashlight sizes(18-26mm).
Custom rubber matting shock and slip resistance. Anti-aging elements were added to rubber compound for extended service.
Beautiful symmetrical design yet practical and versatile.
Click link to see picture of the Fenix Bike Mount
· Fenix TK and TA Series Remote Pressure Switch. AR102
Fenix's TK-series remote pressure switch is specially designed for Fenix's tactical flashlights - TK12, TA20, and TA21. It has four internal sensors with a steel spring-switch module for consistantly reliable operation. The switch cable can extend up to 80cm and activates with just slight finger pressure.
Specifications
Pressure pad cover rated for 100,000 cycles, and switch rated for 1A electric current
Switch cable made from resilient PU material; 23cm coiled, 80cm expanded
Adapter tailcap made from T6-grade aluminum with type-III hard-anodized finish
Waterproof to IPX-8 standard
Complete assembly weighs 53.2 grams
Compatible with TK12, TA20, and TA21 flashlights
|
You are now located at: J2ledflashlight 
Home 
