Located in Toronto, Canada
Free Shipping to Canada
No GST/HST for our Canadian customers
Package Includes:


1-
Fenix PD32 is an outdoor flashlight in small size for versatile usage. It offers
four levels of brightness and two types of flashing mode to be adjusted by pressing
the side switch in the head, it perfectly meet the needs of different brightness
and runtime in various conditions. PD32 is a portable flashlight with light weight,
with two frost-
capacity 18650 Li-
ANSI / FSC
General Mode
Turbo
High
Mid
Low
Output
Runtime
315 Lumens
130 Lumens
70 Lumens
9 Lumens
2 h
8 h
200 h
16 h
Distance
141 m
Intensity
Impact
Resistant
Waterproof
5000 cd
1 m
Flashing Mode
Strobe
315 Lumens
IPX-
SOS
130 Lumens
◎Cree XP-
◎Uses two 3V CR123A batteries (Lithium) or one 18650 rechargeable battery (Li-
◎127 mm (Length) x 25.4mm (Diameter)
◎61-
◎Digitally regulated output -
◎Reverse polarity protection, to protect from improper battery installation
◎Over heat protection to avoid high-
◎Anti-
◎Tactical tail switch with momentary-
◎Side switch in the head
◎Made of durable aircraft-
◎Premium Type III hard-
◎Toughened ultra-
Notice:
The above-
*The flashlight will transfer into the High brightness level after working about 30 minutes in the Turbo. Therefore, the runtime of Turbo output is an accumulated time.

Fenix PD32 in a holster
Operation Instruction
Light turning on/off:
Press the tail switch lightly to activate the flashlight momentarily. And press the switch completely to turn on the flashlight and lock it. Another complete press on it can turn it off.
On/Off Operation:
Depress the tail switch gently to momentarily activate the light. Depress the tail switch completely to turn on the light and lock it. Another complete press on it can turn it off.
Mode Selecting:
A single press on the side switch in the head to adjust the brightness levels from Turbo → Low output → Medium → High → circle.
Depress the side switch and hold it for 1 second to enter into Strobe mode.
Depress the side switch and hold it for 3 seconds to enter into SOS mode.
When the flashlight is in Strobe mode or SOS mode, a single press on the side switch to return to general lighting mode.
The flashlight memorizes the last output in general lighting mode. However, it does not memorize the mode, so the flashlight works in general lighting mode when it is lighted every time.
Over-
PD32 will accumulate a lot of heat when it is working in Turbo output. To avoid the influence of using experience due to the high temperature, the flashlight will automatically transfer into the high brightness level by working in Turbo output for over 30 minutes. If the Turbo output is needed continually, just reset it again.

Don’t forget the Fenix PD32 combo specials : (No international sale)

+

+

+

+
Free shipping in Canada. No GST / PST

Bonus : white diffuser tip
+
Bonus : White Diffuser Tip
+
Bonus : White Diffuser Tip




Copyright 2004 -
