| |

|
High performance outdoor flashlight with one AA battery.
Utilizing Cree XP-G LED (R4), throws maximum of 132 lumen output.
|

|
Optimized optical system.
34 hours maximum run time.
Brand new steel body clip with Ti exterior coating.
|

|
High efficient reflector, perfect combination of focus beam and flood beam.
|

|
Rugged and practical body clip made from durable steel with Ti exterior coating.
|

|
Constant current circuit, maintains constant brightness.
|

|
Rhobic knurling for better grip.
|

|
Attach the flashlight to pocket, belt.
|

|
34 hours run time rate at 9 lumens.
|

|

|
Wear resistant trapezoid thread.
|

|
Outstanding beam profile with automatically centred LED system and shallow smooth reflector.
|

|
Want to shop in USD?
CLICK HERE to visit our online EBAY store for more Fenix specials!
|
The Fenix LD10 is an outdoor flashlight for multiple uses; it combines high brightness and long runtime with 4 lighting levels and 2 flashing outputs for constant brightness. Its portable, compact size and the water-proofing of the IPX-8 standard make the LD10 a dependable flashlight for your lighting applications plus emergency use.
Features
- Cree XP-G LED (R4) with lifespan of 50,000 hours
- Two modes (6 types) of output, generation/turbo selected by turning the bezel (patented)
- General Mode: 9 lumens (34hrs) -> 50 lumens (6hrs) -> 105 lumens (2.2hrs) -> SOS
- Turbo Mode: 132 lumens (1.5hrs) -> Strobe
- Digitally regulated output - maintains constant brightness
- Uses one 1.5V AA ( Alkaline, Ni-MH, Lithium ) batteries,inexpensive and widely available
- 100mm (Length) x 21.5mm (Diameter)
- Made of durable aircraft-grade aluminum
- Premium Type III hard-anodized anti-abrasive finish
- 54-gram weight (excluding batteries)
- Waterproof to IPX-8 Standard
- Toughened ultra-clear glass lens with anti-reflective coating
- Push-button tail cap switch
- Capable of standing up securely on a flat surface to serve as a candle
- Anti-roll, slip-resistant body design
- Included accessories: holster, lanyard, body clip, two spare o-rings, and a rubber switch boot
The above-mentioned parameters are approximate and may vary between flashlights, batteries, and environments.
This product comes with a smooth reflector
Operation
Fully press (click) to switch on and turn the bezel to select the General Mode or the Turbo Mode.
A soft-press (no click) anytime while the light is on will change the brightness levels of a certain mode.
Keep the light off for over 2 seconds and the light will turn completely off, restoring the regulation circuit to the default setting
Package Includes:
Fenix LD10 XP-G R4 Cree Flashlight with pocket clip - Black Finish
Belt Pouch
Lanyard
Extra O-Rings
Spare tailcap boot
battery not included
Battery Replacement
Unscrew the tail cap to insert the batteries with the anode side (+) toward the lights head, screw the tail cap back on to test.
Usage and Maintenance
Please don't disassemble the sealed head, doing so can cause damage to the flashlight and will void the warranty.
High-power light should use battery with high current discharge ability, we suggest using high performance Ni-MH rechargable battery, using alkaline battery will lower the runtime of high intensity light.
Please use batteries of high quality, if the flashlight is not to be used for an extended period , remove the batteries, or the flashlight could be damaged by electrolyte leakage or battery explosion.
Please replace the O-ring if they are damaged after using for a long time and regularly lubricant the o-rings as to not erode the rubber. Doing so will keep the flashlight properly sealed against water.
Please clean the contacts of your light from time to time, especially if the light flickers or doesn't light up. There may be several reasons for a flickering or not working light:
Reason A: The battery needs replacing.
Solution: Replace batteries (Please confirm the correct installation of anode and cathode).
Reason B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with an alcohol soaked cotton swab.
If the above methods don't work, please contact the distributors and refer to the warranty policy.
|
|
|
| |
Fenix Website Promotion for Canadian Residents or Canadian buyers only.
4 Fenix accessories included - Red Filter, White Diffuser Tip, Red Traffic Wand and Diffuser Lens per Fenix LD10 flashlight.
Free World Wide Shipping. No PST and GST for our Canadian customers.
We are currently out of stock of the R4 Cree Version.
We have the lastest R5 Cree version in stock.
Fenix LD10 R5 Cree - latest version - LED flashlight
|