The Fenix LD10 is an outdoor flashlight for multiple uses; it combines high brightness and long runtime with 4 lighting levels and 2 flashing outputs for constant brightness. Its portable, compact size and the water-proofing of the IPX-8 standard make the LD10 a dependable flashlight for your lighting applications plus emergency use.

This is the latest model now rated using the new ANSI output standards.

Features of :

Fenix LD10 R5 Cree LED Flashlight :
• Cree brand XP-G R5 LED with a life of 50,000 hours (approximate)
• Two output modes (select by turning the bezel): General and Turbo
• General mode:
   3 lumens, 70 hr runtime
   13 lumens, 11 hr runtime
   45 lumens, 4.4 hr runtime
   SOS
• Turbo mode:
   100 lumens, 1.45 hr runtime
   disorienting strobe (100 lumens)
• Digitally regulated for more constant brightness
• Powered by a single AA battery (Alkaline, Ni-MH or Lithium)                        **battery not included **
• Made of T6 aircraft grade aluminum with durable Type III hard    anodized finish
• Toughened ultra clear glass lens with AR (anti-reflective) coating
• Smooth reflector
• Waterproof to IPX-8* Standard, submerged in 2 meters of water for 30 minutes   (not dive rated)
• Push-button tail cap switch for constant on/off (no momentary on)
• Includes wrist lanyard, 2 spare O-rings, spare rubber switch boot, removable pocket   clip and nylon belt holster with top flap and   velcro closure.
Note: damage due to battery leakage is not covered under warranty.

 

Operation
Fully press (click) to switch on and turn the bezel to select the General Mode or the Turbo Mode. A soft-press (no click) anytime while the light is on will change the brightness levels of a certain mode. Keep the light off for over 2 seconds and the light will turn completely off, restoring the regulation circuit to the default setting.

Battery Replacement
Unscrew the tail cap to insert the batteries with the anode side (+) toward the lights head, screw the tail cap back on to test.

Usage and Maintenance
Please don't disassemble the sealed head, doing so can cause damage to the flashlight and will void the warranty.
High-power light should use battery with high current discharge ability, we suggest using high performance Ni-MH rechargeable battery, using alkaline battery will lower the runtime of high intensity light.
Please use batteries of high quality, if the flashlight is not to be used for an extended period , remove the batteries, or the flashlight could be damaged by electrolyte leakage or battery explosion.
 

Please replace the O-ring if they are damaged after using for a long time and regularly lubricant the o-rings as to not erode the rubber. Doing so will keep the flashlight properly sealed against water.
Please clean the contacts of your light from time to time, especially if the light flickers or doesn't light up. There may be several reasons for a flickering or not working light:
Reason A: The battery needs replacing.
Solution: Replace batteries (Please confirm the correct installation of anode and cathode).
Reason B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with an alcohol soaked cotton swab.
If the above methods don't work, please contact the distributors and refer to the warranty policy.

 

Package Includes :

Fenix LD10 R5 Cree LED Flashlight

Holster

2  x O rings

User manual

1 x tail cap

1 x red diffuser tip

Warranty form (not shown)

J2ledflashlight.com  copyright 2004 - 2012

Fenix LD10 in a holster

Don’t Forget additional accessories

For your Fenix LD10.

Fenix LD10 R5 Cree LED Flashlight

 Fenix LD10 in a hand

    Free World Wide Shipping

   No GST / HST for Canadians buyers

Bonus